Whole CNC Systems adopts multi-leveled menu and full screen operation, user-friendly interface, providing comprehensive information. Enter into main interface as followed when electrified：
Here bellow is the definition of each display area under system main screen (refer to Fig3.2):
1, title bar: the top column shows current date and time
2, program name display area: show the program which will execute or being running
3, program display area: show the program content which will execute or being running and also its process.
4, feed speed display area: show the instruction speed, override, real speed and speed ratio of feed axis. “F500”in the column means the speed is 500mm/min; “100%” behind means real running speed is 500mm/min x 100%
5, spindle speed display area: show current speed, rate, real running speed and speed ratio of spindle instruction. “S800”in the column means the speed is 800r/min; “100%”behind means the real running speed is 800r/min x 100%.
6, spindle real speed display
7, G00 speed ratio display: in auto mode, the real running speed of G00 is “G00 speed X 100%”
8, Status display: to display system status---auto or manual mode, also continuous, increment, MPG in manual mode; step, continuous, real machining, simulation, stop, run status and relevant information in auto mode.
9, M code display: to display M code status
10, tool status display: to display relevant information of tool
11, machined time display: to display executed time of current program
12, coordinate display: dynamic coordinate display, viz. display current selected coordinates (it may be machine coordinates or workpiece coordinates).
13, information display: display information relevant to system, machine. such as alarm, soft/hard limit etc.