cnc controller - cnc controller systems products
CNC Systems Milling(130iMe)

CNC Systems Milling(130iMe)

CNC Systems FOR MILLING--130iMe : ●32-bit high performance low power industrial grade microprocessor, 400MHz CPU speed, realizing high speed ,high accuracy controlling. ●Controllable axes: 3-4axes ●Simultaneous axes: Linear 2-4axes, Arc 2-3axes ●8 inch TFT display unit ,800x600 ●New Advanced Modular design and structure,greatly enhanced anti-interference ability and improved its reliability in harsh factory environment. ●2ms interpolation period and accuracy arrive to 1um, can set as 0.1um. ●Max. Rapid transferring speed up to 60m/min; Max.cutting speed up to 30m/min ●A,B two groups G commands , compatible with international standard G codes. ●Linear, S shape acceleration and deceleration controlling ,front acceleration and deceleration controlling, program prefetch function and smoothness treatment function, bring to high speed and high accuracy machining purpose. ●Open PLC ,supplying secondary PLC software development; built-in 48x32 IO ports ,users can edit IO logic to meet different requirements.

Product Description:

Powerful 4axis Milling CNC Controller CNC130iMe is our new Mill CNC Control model designed specially for small budget and can maximum control 4axis , but standard configuration is 3axis . it adopts CPU with32 bits 400MHz ARM high capacity industrial grade composing a control core, and achieves the μm level accuracy motion control. It is characterized by multiple functions, stable and cost performance CNC Controller models and easy operation; Good Choice for Universal milling machine and engraving machine



Technical Specification:

Motion control



Control axes: X,Y,Z,4th(standard:3axis); linkage axes: 3axes; PLC control axes: 4axes

Interpolation function: X,Z two axes linear,arc and thread interpolation: X/Y two axes linear interpolation;2ms interpolation period and accuracy arrive to 1um, can set as 0.1um.

Position command range:-9999.999mm-9999.999mm;the minimum unit:0.001mm

Max.rapid traverse speed:60m/min; Max.cutting speed :30m/min

32-bit high performance low power industrial grade microprocessor, 400MHz CPU speed, realizing high speed , high accuracy controlling.

Feed rate override: 16-level real-time adjustment from 0-150%

Interpolation mode: linear, circular arc, thread,ellipse, parabola, rigid tapping

Thread function: equal pitch straight thread/taper thread/end face thread, variable pitch straight thread types and thread retraction length, angle, speed can be set.

Pre acceleration/deceleration: the acceleration/deceleration after interpolation can select the linear or S type, and the acceleration/deceleration time constant can be set by parameter

MST function

M function can be specified by address M , M function can be user-defined.

Analog voltage output of 0v-10v in two channels ,support two spindles.

Real-time adjustment of spindle rate and spindle encoder resolution can be set

Adapted servo spindle can realize spindle continuous positioning, rigid and flexible tapping

T and 4 digits select the tool ; Tool offset value setting; Tool length compensation ;tool nose radius compensation (C type);tool wearing compensation;

Automatic compensation

backlash compensation,pitch error compensation;tool length compensation,tool radius compensation

Reliability and safety

State signals: emergency stop, overtravel ,stroke limit,servo ready signal, automatic run start light signal ,automatic running signal , feed hold light signal.

Self-diagnosis function: signal abnormity, system abnormity,servo abnormity, position control abnormity, spindle abnormity and so on.

NC alarm:program error, operation error, overtravel error, servo error, PLC error, memory error

Operation function

Operation mode: edit, auto, MDI, machine zero return,MPG/step, Manual ,DNC,single block,Dry run, MST lock, orogram restart, MPG interruption, step interruption,Manual interruption; Machine lock, interlock , feed hold ,cycle start, emergency stop, external reset signal .external power ON/OFF.Program zero-return, Multi-level operation authorization management


horizontal installation / vertical installation :8 inch 800x480 TFT LCD display unit ;

Display in Chinese/English language

PLC function

PLC ladder being displayed on-line and monitored in real time;PLC alarm ;

Open PLC,supplying secondary PLC software development; built-in 48x32 IO ports and I/O real-time diagnosis ,users can edit IO logic to meet different requirements.:


DNC/USB function

support RS-232 serial port, USB and network interface , can realize data transfer, DNC machining and USB on-line machining function

Optional drive unit

GT Series digital AC servo drives or 17bit/23bit absolute servos


Packing and delivery:



130iMe cnc kit.jpg
Your Email *
Content *
Product Name:
Your Name *
Tel Phone:
Your Email *
Content *
Product Name:
Your Name *